Radon gas is simple to detect. Buildings or homes can easily be vented to protect from health hazards of radon—have your home tested today.



Radon mitigation is a process used to reduce radon gas concentrations in the breathing zones of occupied buildings or radon from water supplies. Mitigation of radon in the air is accomplished through ventilation, either collected below a concrete floor slab or membrane on the ground, or by increasing the air changes per hour in the building. Treatment systems using aeration or activated charcoal are available to remove radon from domestic water supplies.

Dr. Richard H. Carmona, former U.S. Surgeon General, says, "Indoor radon is the second-leading cause of lung cancer in the United States and breathing it over prolonged periods can present a significant health risk to families all over the county. It's important to know that this threat is completely preventable. Radon can be detected with a simple test and fixed through well-established venting techniques."

Radon is an invisible, odorless and tasteless gas, with no immediate health symptoms, that comes from the breakdown of uranium inside the earth. Simple test kits can reveal the amount of radon in any building. Those with high levels can be fixed with simple and affordable venting techniques. According to U.S. Environmental Protection Agency (EPA) estimates, one in every 15 homes nationwide have a high radon level at or above the recommended radon action level of 4 picoCuries (pCi/L) per liter of air.

K. C. Wester, LLC is a licensed
contractor for radon
mitigation services.

© 2014 K.C. WESTER, LLC                                 ALL RIGHTS RESERVED                 7 AVENIDA VISTA GRANDE, PMB 417, SANTA FE, NEW MEXICO 87508